10-12 Ford Taurus / SHO Megan Racing Coilovers- EZII

Brand: Megan Racing

Part number: MR-CDK-FFX09-EZII

  Lease to own   Pay as low as   $/week

Megan Racing Coilovers- EZII for 10-12 Ford Taurus / SHO

Part Number:MR-CDK-FFX09-EZII

Megan Racing EZ II Series Coil-Over kits are the ultimate upgrade to your street car. Featuring 15 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension.

Compression and rebound settings are adjusted through a single damper adjustment knob. Adjustments are simple to tune according to your driving style and desired comfort level. All of Megan Racing coilovers are capable of handling a +/- 2k change in spring rates to further tune your suspension to your desired handling characteristics without the need to revalve.

The quality and durability of the Megan Racing coilover kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

Our most recent addition to our expansive coil-over kit line up, the EZ STREET coil-over line up is aimed towards the more budget oriented enthusiast to offer the most basic essentials from an aftermarket coil-over setup, yet makes no compromises for quality and performance.


  • 15 Damping levels for great ride quality
  • Aluminum mounts with rubber inserts (No Camber Plates)
  • Rubber Dust Covers
  • Adjustable Ride Height
  • Conservative Spring Rates
  • Single-Cylinder Design - mono-tube
  • All coilover damper kits come with 1 year manufacturer-defect warranty
Spring Rates:
  • Front: 6K
  • Rear: 14K

  • Customer Reviews

    Based on 3 reviews
    David J. (Washington, US)
    Rides awesome

    The install was relatively simple. Everything from the top mounts fit perfectly you will have to adjust your sway bar links with a set of either custom or adjustable sway bar links. I went with the brand white line to make the adjustment and it all fell right into place. Mine is an SEL and yes it did fit perfectly. After the new white line adjustable sway bar links were installed it drove absolutely awesome.

    Michael S. (Clinton Township, US)
    Megan coilover

    I was very disappointed when I installed them to only find out the sway bar links don’t fit the holes. Had to get a 20$ drill bit and drill the holes out to 9/16”. It did not say it needed modifications. Also if you don’t have a drill gun you can adjust to a slow speed you will burn bits up!!

    Andre S. (Detroit, US)
    I'm happy

    I'm happy. Coilovers are amazing.