08-17 Mitsubishi Lancer FWD / AWD BC Racing Coilovers - BR Type
BC Racing Coilovers For The 08-17 Mitsubishi Lancer FWD / AWD
Part Number: B-19-BR
The BC Racing Coilover kit for the Mitsubishi Lancer is perfect for street driving and occasional road course duty. With easily accessible adjustment knobs for fine tuning your compression/rebound and separately adjustable ride height, having a performance coilover system could not be any easier. You choose how low or high you want your vehicle, no preset ride height here, and their patented concave lower locking ring keeps it locked in. All of BC Racing systems come with pillowball mounts to provide the most feedback possible from your suspension and to sharpen your steering response. Available front and rear camber plates also allow you to get the perfect alignment setup without compromise. All this while providing a strong, attractive looking coilover system.
Fits both AWD and FWD including Ralliart
- Mono-tube shock design
- Full height adjustability through shock body, not spring
- 30 levels of dampening adjustment (compression/rebound)
- Front camber plates are default on all applicable kits
- Rear camber plates applicable on certain applications only
- Custom spring rates available as well as a SWIFT springs upgrade available upon request
- 1 Year warranty against manufacturer defect
- Completely rebuildable and individual parts are available separately for purchase
- Images used may be generic. Actual product may vary.
Spring Rates included : Front Spring Rate = 6k Rear Spring Rate = 4k
For custom spring rates please request them in the comment box during checkout.
These have greatly improved the handling of my Lancer. I am able to lower or raise my vehicle easily, adjust the dampening of the shock. I have the rears set to the middle at 15 clicks and the fronts are set to 10 clicks. BC Racing recommends you adjust the coilover about a week after install and then get the wheel alignment done. These are a great investment for your Lancer.
I got my coilovers and everything was great !
They helped me with everything and also responded quick to my emails and pretty good estimates on how long it would take ! Thank you again ! I recommend!
I am very pleased with my new coilovers, I purchased these with the extra low / upgraded swift spring! Me and my boyfriend installed them onto my car over the weekend, Instructions that came with the coils are trash you are way better off looking up how to install on your car by Youtube (But I'm sure you knew that lol). I thought the coils were packaged really well, I did however notice upon taking them out of the box that the springs were kind of scratched up on every single one.. which wasn't a huge deal but when you spend almost $1,400 on something you'd just expect it to come with absolutely no blemishes. That was not a deal breaker for me though. Its only been a day since installation so I can't really say to much about the quality of the springs, I am trying to adjust the dampening at the moment to my liking because I did not like the preset one, it was just a little to stiff for my area of roads (there super bumpy). Also huge shout out to BC racing for including the extenders for adjusting the back but where the heck am I supposed to run the line!? There's no hole, so I am having a hole welded to make the back easier to get to. If you don't do that, you cant adjust the dampening at all. Maybe that was just for my year of car , don't know but I love the look so I have no problem doing the little bit of extra work!